- Convenient & Low Cost
- Portable & Easy To Use
Portable Conveyor - Lightweight, Easy to Move and Easy to Use!
ConveyorEase is a 10' long by 15" wide portable conveyor designed for homeowners & handymen.
This 130 lb lightweight portable conveyor is easy to move and easy to set up.
It uses 110/120 volt power and can be plugged into your household wall socket or generator.
Hand Loading Hopper
A hand-loading hopper can be helpful when loading loose materials. For clean loading add this to your order and make your jobs faster and easier.
6 1/2 ' Side Extensions
Side extensions can be added to help contain loose materials without spillage. A pair of 6 1/2 ft side extensions paired with a hopper will cover the length of the conveyor.
10 ' Side Extensions
Side extensions can be added to help contain loose materials without spillage. A pair of 10 ft side extensions will cover the entire length of your conveyor
Frequently Asked Questions
Yes, ConveyorEase is manufactured in and shipped from the US to all parts of North America, including all 50 states and all of Canada.
ConveyorEase runs on a 120V outlet (regular household power or a small generator). You must use the proper gauge extension cord. A 12 gauge is appropriate for distances up to 75 ft. and you will need a 10 gauge for a longer distance up to 150 ft
The conveyor weighs 130 lbs. and measures 119”L x 15 ½”W x 7 ¾”H. The handloading hopper weighs 35 lbs. and measures 40”L x 24”W x 12 ¼”H at the highest point. Side Extensions that go with the hopper weigh 23 lbs. per pair and measure 6 ½’L x 4 ¾”H. The longer version of the side extensions weigh 45 lbs. per pair and measure 10’L x 4 ¾”H.
ConveyorEase can carry 300 lbs of material at one time.
ConveyorEase is manufactured with materials that will not rust or corrode. The conveyor can be run in damp, wet, cold or hot weather. It should not be run submerged under water.
The basic ConveyorEase unit is fitted with a smooth belt but a cleated belt can be ordered instead. The cleated belt is helpful if running at an incline with loose materials, such as gravel. If you are moving loose material, it will stay better contained by adding side extensions. If you have questions about the accessories you need for your specific job, feel free to contact us for help in making that decision.
A small amount of regular maintenance will ensure a long life for your ConveyorEase. You will need to inspect the conveyor, belt and accessories after usage to be sure no damage has occurred. Wash down the conveyor after use, removing any debris that may have collected under the belt. Check the tracking of the belt, make necessary adjustments and occasionally grease the side skirts. All of this is covered in detail in the operator’s manual you will receive with your order.
Sure, just contact us through the website and we can help you out.
Of course, the best way to contact us is through our website and a technician will call you back in a timely manner to walk you through any issues you might have with or questions about your equipment.
Yes, but we recommend placing a 4x4 under each end of the conveyor to keep it away from material that might be on the floor or to keep the conveyor from sinking into soft ground.
The best way is to pass a pipe or scaffolding tube through the holes in the structure. You can use a pipe or tube smaller than 2” in diameter. Then safely secure each end of the tube at the desired height.
Wear items are belts, side skirts and molded end caps.
ConveyorEase is warrantied for 90 days excluding wear items.
ConveyorEase is eligible for return within 30 days of purchase if unused and is subject to a 25% restocking fee plus the cost of freight. Set up and cost of return shipping is the responsibility of the purchaser.
ConveyorEase is not eligible for return after use unless it is determined by the manufacturer to be a warranty issue.